Email us at firstname.lastname@example.org
Genie G3T-BX Intellicode 2 Dual Frequency 315/390 MHz Three Button Visor/Keychain Garage Door Opener Remote Control Part Number 37218R.
Works With Genie Intellicode Series II and new Series III garage door openers on 315 and 390 MHz frequency manufactured from 1997 to present. Compatible with newer dual frequency Genie garage door openers.
The G3T-BX Remote Transmitter Activates up to three garage door or gate receivers and works with all Intellicode and Code Dodger receivers manufactured since 1997. Equipped with Test/operate LED Low battery warning. Visor clip included One-Year manufacturers warranty Detailed Programming instructions included
Model: G3T-BX part number 37218R or 37330R
Power: 3 volt lithium battery CR2032 included
Frequency: Dual frequency 315/390 MHz
Codes: Intellicode rotating code system
Dimensions: 2.75 x 1.625 x 0.625 inches (excluding visor clip if used)
The Genie G3T-BX can replace the following remotes to control up to three devices:
G2T-1 G2T-2 G2T-3 GIT-1 GIT-2 GIT-3 GIC-1 GIC-2 GIC-3 GIC90-1 GIC90-2 GIC90-3 ACSCTG Type 1 ACSCTG Type 2 ASCTG Type 3 GMIC-2 GMIC-3BL TBSTG Type 1 TBSTG Type 2 TBSTG Type 3 OCDTR-3 OCTD-1 OCTD-2 OCTD-3 OC2T-1 OC2T-2 OC2T-3 ACSCTO Type 1 ACSCTO Type 2 ACSCTO Type 3
Not all compatible models may be listed.
Not compatible with the old code switch system or pre 1997 Intellicode system.
The Genie G3T-BX Remote is compatible with these models also
If you are unsure about compatibility, please contact us prior to purchase
SILENTMAX 1000 Belt Drive 3042, 3042-TK3, 3042-TKV, 3042-CCRV
SILENTMAX 1200 Belt Drive 4042, 4042-TKC
IntelliG-1000 Belt Drive 3024, 3024H-TKC - IntelliG-1200 Belt Drive 4024, 4024HC
ChainMax 1000 Chain Drive 3022 - ChainMax 1200 Chain Drive 4022
IntelliG 1000 Chain Drive 3024, 3024H - IntelliG-1200 Chain Drive 4024, 4024H
PowerMax 1500 Screw Drive 4062 - PowerMAX 1200 Screw Drive 3062
TriloG 1200 Screw Drive 3064, 3064H - TriloG 1500 Screw Drive 4064, 4064H
PowerLift 900 Screw Drive 2562 - GPower 900 Screw Drive 2564, 2564H
This is a brand new Genie Intellicode 2 model G3T-BX three-button visor or key chain garage door opener or Intellicode radio receiver remote control transmitter. This remote works with all Genie Intellicode or Overhead Doors Code Dodger garage door openers or gate radio receivers manufactured since 1997. This newly designed remote is compatible with the Genie Intellicode 1 versions also known as the series II control system as well as the new Intellicode 2 system introduced in 2011. Each button can be individually set for either the Intellicode 1 mode or the Intellicode 2 mode.
The remote includes programming instructions on how to change the mode of the individual button from Intellicode 2 (factory default) mode to the Intellicode 1 mode. Once each of the button are set to the correct mode for the device it is to operate it then needs to be added to the door opener or radio receivers memory. Will not work on garage door openers or gate receivers that use the older code switch type remotes or the original Intellicode system manufactured prior to 1997. Controls up to three garage door openers or gate radio receivers.